PARTNER PRODUCT GUIDE / REV. 1.0 / OCTOBER 2026
Technical specifications.
Engineering design values for the production chassis. Specifications may be refined before start of production. US customary units first; metric in brackets. Conversions are rounded.
Download specification table ↓Platform and running gear
| Parameter | Design value | Configuration / qualification |
|---|---|---|
| Platform length | 25 ft | Flat-deck towable chassis |
| Chassis mass | ≈ 4,410 lb (2,000 kg) | Including fresh water and fuel |
| GVWR target | ≤ 10,000 lb (4,536 kg) | Design target; towing eligibility depends on vehicle combination and applicable requirements. |
| Upfit mass budget | ≈ 5,590 lb (2,536 kg) | Body, interior, equipment and payload |
| Suspension | Tandem independent torsion | Automatic leveling |
| Ground clearance | ≈ 13.6 in (345 mm) | Departure angle 12.5° |
| Tyres | 225/75R16 | |
| Brakes | EMB, electro-mechanical | Supports ABS, electric parking brake and sway control |
| Maneuvering | Remote, self-propelled | Centimetre-level creep and hitch assist |
Energy and power
| Parameter | Design value | Configuration / qualification |
|---|---|---|
| Battery | 41.86 kWh LFP | Silent supply for daily loads |
| Range extender | 1.5 L gasoline, up to 50 kW | EPA / CARB certification scheduled for July–August 2027; completion not asserted. |
| Combined fuel + battery energy | Up to 200 kWh | Guide estimate: 13.2 gal (50 L) gasoline ≈ 160 kWh plus battery; not battery capacity. |
| AC outlets | 120 V / 240 V | For upfit loads and external equipment |
| Charging | NACS | DC output to EVs up to 50 kW in validation |
Water and climate
| Parameter | Design value | Configuration / qualification |
|---|---|---|
| Fresh / gray / black | ≈ 53 / 34 / 30 gal (201 / 129 / 114 L) | Tank capacities |
| Hot water | ≈ 7.1 gal storage (27 L) | Storage-based instant hot water |
| Heat pump | ≈ 7 kW cooling · ≈ 8 kW heating | Radiant floor heating loop |
Reference upfit envelope
| Parameter | Design value | Configuration / qualification |
|---|---|---|
| Deck top height | ≈ 31.5 in (801 mm) | Above ground, laden and leveled |
| Usable deck length | ≈ 18.9 ft (5.77 m) | Behind the front equipment bay |
| Body width | 8 ft (2.44 m) | Full-width body clears the tyres |
| Main rail spacing | ≈ 60.2 in (1.53 m) | Primary body mounting line |
Upfit Interface v1
| Structure | Main-rail hardpoints, rated loads and load paths; body floor frame or subframe. |
|---|---|
| Power | 12 V distribution and protected 120/240 V AC feeds. |
| Water | Pressurised fresh and hot water; grey and black water inlets. |
| Climate | Heat-pump heating/cooling and radiant floor heating loop. |
| Data | Vehicle controller, CAN access and energy, water and climate status. |
Details for your integration team.
Detailed drawings and 3D CAD are shared under NDA. Request the applicable revision, mounting coordinates, load limits, electrical protection ratings and control-interface definitions before releasing your body design.
AC continuous output, surge rating, axle and coupling load limits, and the permitted center-of-gravity envelope are not quantified in the supplied guide. Confirm these in the interface package.
Prepare your program brief ↗